Combination of quick-clamp automatic mold changing system and robotic arm

Combination of quick-clamp automatic mold changing system and robotic arm

 

  1. The quick-clamp automatic mold change system is a quick mold change system and a compact wrench.The mechanical arm can easily push the wrench to the bottom to connect the quick mold change system with a vise or other clamping fixture (hereinafter referred to as clamping). The system, which refers to the vise or jig that has clamped the processed material) is tightly coupled and then can be processed.
  2. After the processing is completed, the robot arm can return the wrench to its original position in the opposite direction, take it out, replace it with a new set of clamping systems, put the clamping system in position, and then repeat the action of 1. processing.
  3. The advantages of this application method are: 1. The length and volume of the compact wrench does not take up space, it can be directly combined with the automatic mold changing system, and the length is much shorter than that of the general wrench, which can avoid interference with the fourth axis or workpiece processing. Interference with machinery can also overcome the risk of interference or damage to the pipelines of general hydraulic or pneumatic quick mold change systems.