MODEL	A	B	C	D	E	G	I	M	P	J	Clamping Force	G.W. KG
DPV-6''-100	160	530	680	90	58	55	18	265	15	100	4000kgf	66

 

Standard Accessories：

1. Handle x1 pc

2. Guide key x2 pcs

3. Screw M6x10L x2 pcs

4. Vise locked block x4 pcs

 

 

Features：

• Double clamping structure

       Clamping two workpieces simultaneously, increasing productivity, so that the original

       function of holding more rapid upgrade.

• Quick clamping and relieving

       The vise principle is the use of reciprocating air compressor motor. The method of oil

       passage by pushing continuous pressure to achieve automation.

• High clamping force

       Low-pressure compressed air source 8kg / cm², the clamping force can be up to

       ultra-high 4000 kgf.

• Automatically find the highest pneumatic source

Ø            When copper and aluminum products are light processing or raw material of cast iron

              is heavy cutting. Set at the desired  pressure with the regulator, will not result in low 

              air pressure source and loss of pressure, and the regulator can fill and fix the 

              pressure function automatically, to ensure the clamp of the workpiece.

• Humanized design

       Just a manual switch control vise switch, the switching speed of just 1.5 seconds, 

       holding a safe distance for 5mm.During operation to prevent injured. When the 

       clamp can also be done with a special automated unmanned production system 

       design (can be used with electrically controlled valve or via the controller 

       machine's operation).

• Ultra Material

       Vise body material is high ductility of spherical graphite cast iron (FCD600), vise both

       sides of the slide hardened heat (HRC45 °), ensure high precision and high wear

       resistance, high tensile strength.

• Hemi-spherical structure

       The semi-sphere shape can be generated under the power of the lock, the jaw plate

       doesn't lift and the workpiece doesn't tilt.