MODEL A B C D E G I M P J Clamping Force kgf G.W. KG TPV-4''-100 100 320 435 100 48 45 16 145 15 100 3200 29 TPV-5”-150 130 380 505 105 55 52 18 145 15 150 6000 40 TPV-6”-160 160 400 525 105 58 55 18 145 15 160 6000 50 TPV-6”-250 160 490 615 105 58 55 18 145 15 250 6000 55 TPV-7”-200 180 460 585 110 63 60 18 180 18 200 9000 72 TPV-8”-200 200 470 595 110 63 60 18 180 18 200 9000 80 TPV-8”300 200 570 695 110 63 60 18 180 18 300 9000 90

Standard Accessories： 1.Handle x 1 pc、2.Guide key x 2 pcs、3.Screw M6x10L x 2 pcs 4.Vise locked block x 4 pcs

Features：

• Quick clamping and relieving

         The vise principle is the use reciprocating air compressor motor. The method of oil

         passage by pushing continuous pressure to achieve automation.

•  High clamping force

         Low-pressure compressed air source 8kg / cm2, the clamping force can be up to

         ultrahigh 9000 kgf.

• Automatically find the highest pneumatic source

         When copper and aluminum products are light processing or raw material of cast

         iron is heavy cutting. Set at the desired pressure with the regulator, will not result in

         low air pressure source and loss of pressure, and the regulator can fill and fix the

         pressure function automatically, to ensure the clamp of the workpiece.

• Humanized design

         Just a manual switch control vise switch, the switching speed of just 1.5 seconds,

         holding a safe distance for 8mm, during operation to prevent injured. When the

         clamp can also be done with a special automated unmanned production system

         design (can be used with electrically controlled valve or via the controller

         machine's operation).

• Stand, side, lying with three for use

         Vises fix sizes, body's six-sides polished plate and set aside slots, no fixture plate,

         you can vertical processing.

• Ultra Material

         Vise body material with high ductility of spherical graphite cast iron (FCD600) integral

         product design, vise both sides of the slide hardened heat (HRC45 °), ensure high

         precision and high wear resistance, high tensile strength.

• Hemi-spherical structure

         The semi-sphere shape can be generated under the power of the lock, the jaw plate

         doesn't lift and the workpiece doesn't tilt.